Skip to content
3dprints.tools
CalculatorsFilamentsPrint doctorAbout
Materials

Prusament PC Blend

Polycarbonate blend for strong, heat-resistant parts. Needs high temperatures and an enclosure.

Verified November 2026 · Prusament data sheet

Print settings

Nozzle temperature
265–285°C
Bed temperature
100–115°C
Density
1.22 g/cm³
Length per kg (1.75 mm)
≈ 341 m
Enclosure
Recommended
Drying
85°C for 4 h
Typical price
$40 per kg

About PC

Strong and heat resistant. Needs high temperatures and an enclosure.

Getting good results with Prusament PC Blend

  • Start near the middle of the range (275°C) and print a temperature tower to find your printer's sweet spot.
  • Faster printing needs a hotter nozzle; slow, detailed prints look best near the low end of the range.
  • Use an enclosure and keep drafts away to prevent warping and layer splits.
  • Dry it (85°C for 4 h) if you hear popping, see extra stringing, or the surface turns rough.

Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.