Materials
Prusament ASA
Low-warp ASA formula; still benefits from an enclosure.
Verified November 2026 · Prusament data sheetPrint settings
- Nozzle temperature
- 250–265°C
- Bed temperature
- 100–110°C
- Density
- 1.07 g/cm³
- Length per kg (1.75 mm)
- ≈ 389 m
- Enclosure
- Recommended
- Drying
- 80°C for 4 h
- Typical price
- $30 per kg
About ASA
Like ABS with much better UV and weather resistance. Ideal for outdoor parts.
Getting good results with Prusament ASA
- Start near the middle of the range (258°C) and print a temperature tower to find your printer's sweet spot.
- Faster printing needs a hotter nozzle; slow, detailed prints look best near the low end of the range.
- Use an enclosure and keep drafts away to prevent warping and layer splits.
- Dry it (80°C for 4 h) if you hear popping, see extra stringing, or the surface turns rough.
Plan a print with the print cost calculator or convert meters to grams with the filament converter. Always check the label on your spool, since makers update their recommendations.